**What does this slideshow cover?**
This slideshow covers:
* Parts of the device.
* Tools and equipment for disassembly / assembly.
* How to properly disassemble the device.
* Correctly assembling the device post repair.
* Required outbound quality.
**What will you be able to do after this training?**
After this training, you will be able to:
* Discuss all of the hardware components that make up Galaxy S24 Series devices.
* Explain what tools and equipment are required for assembly and disassembly.
* Complete repairs and the required quality control checks and calibrations following your repair.
# Removable Parts
**What are the removable parts in the Galaxy S24 Series devices?**
The removable parts in the Galaxy S24 Series devices include the:
* UB Display.
* Frame.
* Main Printed Board Assembly (PBA).
* Sub Printed Board Assembly (PBA).
* Components.
* Rear Assembly.
* Battery.
* Back Cover.
# UB Display
**What two things does the UB Display consist of?**
The two things that the UB Display consists of are the:
1. Display panel.
2. Front glass and laminate.
# Frame
**What three things does the frame house?**
The three things the frame houses are the:
1. Front-Facing Camera (FFC).
2. Battery.
3. Millimeter Wave (mmWave) modules.
# Main PBA
**What is the Main Printed Board Assembly (PBA)?**
The Main PBA is *the main board of the device.*
**What components does the Main Printed Board Assembly (PBA) contain?**
The components that the Main PBA contains include the:
* Mobile chipset.
* Main camera.
* Built-in storage.
* Sub microphone.
# Sub PBA
**What is the Sub Printed Board Assembly (PBA?**
The Sub PBA is *the secondary board of the device.*
**What components does the Sub Printed Board Assembly (PBA) contain?**
The components that the Sub PBA contains include the:
* Main microphone.
* USB Type-C interface (I/F) connector.
# Components
**What are the smaller components that can be removed in Galaxy S24 Series devices?**
The smaller components that can be removed in Galaxy S24 Series devices include the:
* Main (rear) camera(s).
* Front-Facing Camera (FFC).
* Flex connectors.
* mmWave antennas.
# Rear Assembly
**Where is the rear assembly?**
The rear assembly *rests between the Back Cover and circuitry boards.*
**What are the three pieces that make up the Rear Assembly?**
The three pieces that make up the Rear Assembly are:
1. The top piece.
2. The middle piece.
3. The bottom piece.
**What does the top piece of the Rear Assembly contain?**
The top piece of the Rear Assembly contains *the Top Speaker.*
**What does the middle and bottom piece of the Rear Assembly contain?**
The middle and bottom piece of the Rear Assembly contains *the SUS Plate, which covers the Main PBA, and the Near Field Communication (NFC) Pad, which connects to the Main PBA.*
**What does the bottom piece of the Rear Assembly contain?**
The bottom piece of the Rear Assembly contains *the Bottom Speaker.*
**What is required for proper speaker function on the bottom piece?**
For proper speaker function on the bottom piece, *the gold circular pads must make proper contact with the pins on the Sub PBA.*
# Battery
**What can happen to the battery with improper removal?**
With improper removal, the battery can *be damaged.*
**What can happen if the battery is damaged?**
If the battery is damaged, *it can ignite and cause injury.*
**How should you hold the battery?**
You should hold the battery *from the center or sides.*
**What two things shouldn't you do when handling the battery?**
The two things you shouldn't do when handling the battery are:
1. Squeeze it.
2. Use unauthorized tools.
**What can happen if you hold the battery by its flex cable?**
If you hold the battery by its flex cable, *you can accidently short the leads.*
# Back Cover
**What is the Back Cover bonded to?**
The Back Cover is bonded to *the frame.*
**What is the only way to remove the Back Cover?**
The only way to remove the Back Cover is *with heat.*
**What is on the edges of the Back Cover which needs to be replaced every time the Back Cover is removed?**
On the edges of the Back Cover, there is *double-sided tape* which needs to be replaced every time the Back Cover is removed.
...